A sheet of ionized air is an effective way to eliminate static and clean parts or materials!
What is The Standard Ion Air Knife? EXAIR´s Standard Ion Air Knife is an effective way to eliminate static electricity from webs, sheet stock and plastic surfaces where dust, tearing, jamming or hazardous shocks are a problem.
This ionizer uses our original Standard Air Knife to carry ions from an ionizing bar to the charged surface - up to 20 feet (6.1m) away. Though not as efficient as our Super Ion Air Knife (40:1 air amplification), the Standard Ion Air Knife (30:1 air amplification) still provides fast static decay and blowoff force for cleaning. Force can be adjusted from a "blast" to a "breeze". The Standard Ion Air Knife is electrically powered, is shockless and has no moving parts.
Why the Standard Ion Air Knife? When air consumption and noise level are not critical to the application, the lower cost makes the Standard Ion Air Knife a good choice. Compressed air inlets are provided on each end of the Standard Ion Air Knife. For long spans, multiple Standard Ion Air Knives can be connected end-to-end. This produces an air gap at the connection end of about 2" (51mm).
Watch the Static Eliminator Video.
The Model 7218 18" (457mm) Standard Ion Air Knife System showers parts with static eliminating ions to prevent personnel shocks. A Model 7212 12" (305mm) Standard Ion Air Knife System cleans metal frames prior to powder coating. A Model 7103 3" (76mm) Standard Ion Air Knife removes dust from computer hard disks prior to assembly.
(If no air gap is desired use the Super Ion Air Knife.) Special length Ionizing Bars up to 120" (3.05m) are available for multiple air knife applications.
Sheeters and trimmers
Pre-paint dust removal
Bag opening/fill operations
5kV Power Supply (not included) is required for operation.