Brand :  EXAIR
Manager :  Tom Gong
Phone :  0755 - 8384 2040
Fax :  0755 - 8384 2050 
Email : 
Website :
Deep Hole Vac-u-Gun

Deep Hole Vac-u-Gun?

Deep Hole Vac-u-Gun

A low cost solution to quickly remove chips and contaminants from grooves, containers and drilled holes, the Deep Hole Vac-u-Gun replaces dangerous blow guns that can cause chips or debris to fly in all directions. Simply position the Deep Hole Vac-u-Gun over the hole and press the trigger. A small blow tube dislodges and lifts the chips while the large suction tube vacuums them away. The operator is protected from flying debris since all contaminants are contained within the clear suction tube. It is perfect for cleaning holes up to 1-1/4"(32mm) diameter at a depth of 18" (457mm). The Deep Hole Vac-u-Gunuses less compressed air than an ordinary blow gun since it injects a small amount of compressed air through directed nozzles to produce a vacuum on one end and a high output flow on the other. The amplified output flow is 12 times the air consumption rate.


  • Holes in fixtures
  • Drilled plastics
  • T-slots groove cleaning
  • Coolant evacuation from parts
  • Woodworking
  • Container cleaning
  • Tapped holes
  • Cupped surfaces
  • Cavity evacuation
  • Bottle cleaning
  • Punch press tables


  • Low cost
  • No moving parts - maintenance free
  • Durable - die cast construction
  • Eliminates shock hazard - no electricity
  • Meets OSHA pressure and chip guard requirements
  • Safe operation - no flying chips
  • Lightweight and portable
  • Quiet
  • Low air consumption
XML ͼ | Sitemap ͼ