Contact
Brand :  Baublies
Manager :  Andy Yan
Phone :  0755 - 8384 2073
Fax :  0755 - 8384 2050 
Email :  baublies@euro-me.com 
Website :  www.baublies.com/en
variable diamond burnishing tool

Variable diamond burnishing tool

Technical Data

Variable diamond burnishing tool for external machining

Machining

External machining of shafts and contours

Standard mount

Square shaft 16, 20, 25 mm

swivel range

240

division

485

Variable diamond burnishing tool for internal machining

Machining

Internal machining of holes and contours

Standard mount

straight shank 20/25/32/40 mm

swivel range

210

division

425

Optional tool equipment

- VDI, HSK etc. mounts

- Diamond with special geometry

- mounting aid

Use parameters to be used

Please note that this information represents guide values which must be adapted to the individual cases.

Workpiece oversize

up to 0.01 mm

Tool preclamping

up to 2 mm

Lubrication

emulsion or oil; filtration of the lubricant (<40?m) can improve the surface quality and the tool life

Pre-machining of workpiece

Surface roughness up to 15 ?m

Maximum hardness of workpiece

65HRC

Speed

up to 100 rpm

Feed rate

0.05 - 0.2 mm/rev

Tip

When setting up and trying out a tool, the speed can be considerably reduced, however the feed rate per rotation is not to be decreased. Even when conducting roller burnishing under unfavorable conditions, e.g. when using high-strength materials, with insufficient lubrication, it is advisable to reduce the speed.

XML ͼ | Sitemap ͼ