Contact
Brand :  HPM
Manager :  Jason Hu
Phone :  0755 - 8384 2040
Fax :  0755 - 8384 2050 
Email :  hpm@euro-me.com 
Website :  www.hpmtechnologie.…
HPM Spray heads

Spray heads and nozzle bars

The selection of the spray head depends on the application area and in particular, on the conditions under which the machine is to be used. In many cases the deciding factors are the room conditions, the feed line direction for the fluid and also the ambient temperature. Our technical staff have many years experience in minimum quantity technology and will find a solution for your workplace.

 

Our Spray head’s are available in series B and R. This is recognizable by the last letter of our product’s name, e.g. PTRB. Series B is supplied with a ball connection piece for assembly to a HPM support. Series R is supplied with a thread for assembly to the customer’s appliance

 

Depending on the application we recommend our universal PTR, the small PSM, the PCJ with a 360° adjustable spray head, the PBMJ or the QSR Spray head. To spray a large surface we recommend a SRJ-, PSM- or PBMJ- nozzle bar

 

For Special functions we can also offer additional Spray head variations. Ask us for it

Spray cone

Spray head PTR in use

 

Spray head HTR

Spray head for a regulated and fine film application of liquids in the low pressure range. Suitable for all liquids, excepted paints, resins and adhesives.

 

Universal Spray Heads, tough, suitable for every application. Large channel diameters and direct feed therefore particularly suitable for use with critical and thick fluids. Flow quantity can be adjusted at the front of the nozzle. Different length adapters are available for the front nozzle.

 

Application: universal. Our Spray head’s are available in series B and R. This is recognizable by the last letter of our product’s name, e.g. PTRB. Series B is supplied with a ball connection piece for assembly to a HPM support. Series R is supplied with a thread for assembly to the customer’s appliance.

Spray head-HTRB050

Spray head-HTRB135

 

Spray head PSM

Spray head for a regulated and fine film application of liquids in the low pressure range. Suitable for all liquids, excepted paints, resins and adhesives.

 

Smallest spray head. Suitable for restricted assembly situations. Flow regulation from the rear. Feed at 90° from rear of spray jet.

 

Our Spray head’s are available in series B and R. This is recognizable by the last letter of our product’s name, e.g. PTRB. Series B is supplied with a ball connection piece for assembly to a HPM support. Series R is supplied with a thread for assembly to the customer’s appliance.

 

Application: universal.

 

This spray head is available in series PSMB and PSMR.

Spray head PSMR-1fold

Spray head PSM-3folds

 

Spray head PCJ

Spray head for a regulated and fine film application of liquids in the low pressure range. Suitable for all liquids, excepted paints, resins and adhesives.

 

Spray head equipped with nozzle head adjustable 360°. Flow regulation at the front, at the outlet of spray jet. Suitable limited only for viscous, strongly adhesive fluids. Application: universal.

 

PCJ 2 folds have 2 spray spots. Application: universal, sawing.

 

Our Spray head’s are available in series B and R. This is recognizable by the last letter of our product’s name, e.g. PTRB. Series B is supplied with a ball connection piece for assembly to a HPM support. Series R is supplied with a thread for assembly to the customer’s appliance.

Spray head PCJR-1fold

Spray head PCJR-2folds

 

Spray head QSR

Spray head for a regulated and fine film application of liquids in the low pressure range. Suitable for all liquids, excepted paints, resins and adhesives. Universal Spray Heads, tough, suitable for every application. Large channel diameters therefore particularly suitable for use with critical and thick fluids.

 

Flow quantity can be adjusted at the front of the nozzle. Different length adapters are available for the front nozzle. The nozzle combination can be changed later. Application: universal.

Special feature from Spray head QSR: Feed at 90° from rear of spray jet. Applicable for appropriate installation situations

 

Our Spray head’s are available in series B and R. This is recognizable by the last letter of our product’s name, e.g. PTRB. Series B is supplied with a ball connection piece for assembly to a HPM support. Series R is supplied with a thread for assembly to the customer’s appliance

 

Available in series: QSRR, QSRB.

Spray head QSRR

 

SRJ Cartridge nozzle bar

Universal individual segments with cartridge inserts. Nozzle distance in the standard 50mm range for a complete wetting of surfaces up to max. 1000 mm.

 

Application: universal, constant spraying at large surfaces

SRJ Cartridge nozzle bar

 

PSM Nozzle bar

Universally for the role of the customer adapted nozzle bar. Nozzle distance selectable from 10mm nozzle bar length for standard applications up to 200mm.

 

Application: universal, constant spraying at large surface.

PSM Nozzle bar

 

 

 

 

XML 地图 | Sitemap 地图