Contact
Brand :  HPM
Manager :  Jason Hu
Phone :  0755 - 8384 2040
Fax :  0755 - 8384 2050 
Email :  hpm@euro-me.com 
Website :  www.hpmtechnologie.…
Series TC

Series TC

Assembly consisting of a polyethylene tank (2.5 - 25 litres) with a support for wall mounting and valve assembly with a maintenance unit. At the maintenance unit is connected the unfiltered and non-lubricated air power (6 - 9 bar). The spray air pressure is set with the pressure regulator. We recommend a low spray air pressure of 0.5 to max. 1.5 bar. By the solenoid valves 24V DC in air and fluid pipes is a mounting of the valve and container groups up to max. 1000 mm of upper as also underneath the spray heads possible. That means with the use of multiple spray heads these can be arranged in different levels to each other and/or to the valve and container group constructions.

 

The valves are not subjected closed. Through the joint opening of the valves enter spray air and liquid to the spray head. Spray beginning, spraying and spraying duration will be determined by the control of the valves from the customer?s control.

TC- equipment with different connection possibilities

TC-1fold_standard

Stationary valve and container groups for operating max. one spray head with a maximum of 6 spray nozzles (for example PSM 6-fold). Suitable for all liquids, except paints, resins and adhesives, which reach a maximum viscosity of 100 mm?/s at 20°C and 35 mm?/s at 40°C.

 

TC-1fold-1Z-EL_standard

TC-3folds_standard

Stationary valve and container groups for joint operation of max. 3 spray heads with a maximum of 6 spray nozzles (for example PCJ 2 fold spray heads = 2 spray nozzles, PTR spray head = 1 spray nozzle). Specifications such as TC-1-fold, but with 5-liters container, electrical control over each 1 air and fluid valve with 24V DC.

 

TC-3folds-1Z-EL_standard

TC-6folds_standard

Stationary valve and container groups for joint operation of max. 6 spray heads with a maximum of 6 spray nozzles (for example PCJ 2 fold spray heads = 2 spray nozzles, PTR spray head = 1 spray nozzle). Specifications such as TC-1-fold, but with 10 liters container, electrical control over each 1 air and fluid valve with 24V DC.

 

TC-6folds-1Z-EL_standard

For an optimal operation we recommend our spray heads / spray bars, which can individually be adapted to your application. If desired, you can define your spray units yourself on the configurator. The HPM Technologie also offers suitable spray Medias.

 

XML 地图 | Sitemap 地图